Brushless Motor

The JTW0934AB001G BLDC (Brushless DC) brushless coin vibration motor produces an average of 1.4 Grms and is rated for a minimum of 1,000,000 cycles. It is an excellent choice for applications with high duty cycles and equipment requiring extremely low MTBF (mean time between failures)/FIT (time to failure). The motor has an integrated driver IC, allowing it to be powered by DC voltage like a standard brushed motor.

Size (mm）：Φ9*3.4
Rated voltage(V)：3.0V
Rated Current（mA）：≤80mA
Rated speed(rpm)：11500±2500
Starting Voltage (V)：≤2.5V

The JTW0825AB001G BLDC (Brushless DC) brushless coin vibration motor is ideal for high reliability applications or high duty cycle applications. This motor has an embedded driver IC, eliminating the need for an external driver IC. DC voltage is applied like a normal brushed DC motor. Voltage polarity must be observed to avoid damage to the internal driver IC. This device only operates on DC voltage and cannot be driven by PWM signals.

Size (mm）：Φ8*2.5

Rated voltage(V)：3.0V

Rated Current（mA）：≤90mA

Rated speed(rpm)：14500±3500

Starting Voltage (V)：≤2.5V

JTB0625A3421F BLDC Brushless coin vibration motors are the excellent choice for high reliability applications that is requiring a quite long life time / MTBF.
It has a stator, which is a permanent magnet, and a rotor, which is an electromagnet,Design is based on a voice coil principal that’s used a lot in linear vibration motors.

Size (mm）：Φ 8*2.5
Rated voltage(V)：3.0V
Rated Current（mA）：≤90mA
Rated speed(rpm)：13000±3000
Starting Voltage (V)：≤2.5V

JTB0625A3420F BLDC Brushless coin vibration motors are the excellent choice for high reliability applications that is requiring a quite long life time / MTBF.
It has a stator, which is a permanent magnet, and a rotor, which is an electromagnet,Design is based on a voice coil principal that’s used a lot in linear vibration motors.

Size (mm）：Φ 6*2.5
Rated voltage(V)：3.0V
Rated Current（mA）：≤80mA
Rated speed(rpm)：16000±3000
Starting Voltage (V)：≤2.5V

The JTW0625SS002D BLDC (Brushless DC) brushless coin vibration motor is a revised version of our popular JTW0625SS001D. Its redesigned lower case assembly eliminates the external FPC connecting the motor’s spring contacts, thereby significantly reducing the motor’s profile. The coil spring contacts are designed to mate with corresponding contact pads on the PCB, making them ideal for high reliability applications or high duty cycle applications.

Size (mm）：Φ6*2.5
Rated voltage(V)：3.0V
Rated Current（mA）：≤80mA
Rated speed(rpm)：15000±3000
Starting Voltage (V)：≤2.5V

With a diameter of only 5 mm, the JTW0525AB001D is the smallest BLDC (Brushless DC) brushless coin vibration motor on the market. Its low G-force of 0.25 makes it ideal for ultra-light wearable devices such as smart rings and lightweight watches. The motor features double-sided tape on the bottom for easy installation and contains an embedded driver IC, eliminating the need for an external driver IC.

Size (mm）：Φ5*2.5
Rated voltage(V)：3.0V
Rated Current（mA）：≤80mA
Rated speed(rpm)：14000±3000
Starting Voltage (V)：≤2.5V

JTG0832008 LRA (Linear Resonance Actuator) Coin vibration motor vibrates on the Z-axis perpendicular to its largest surface. Its Z-axis vibration and low current characteristics make it an excellent choice for wearables and other compact devices.

Size (mm）：Φ8*3.2
Rated voltage(V)：1.8V
Rated Current（mA）：≤80mA
Input Frequency（Hz）：235Hz
Starting Voltage (V)： 0.1~1.85V

JTG0640001D sets the industry standard for small, powerful LRA (Linear Resonant Actuator) devices. The LRA Samsung chose to use in its Galaxy Watch is the result of careful engineering efforts to design a high-G force LRA with the smallest diameter possible. It generates 0.9 Grms of vibration force and is only 6 mm in diameter and 4 mm thick, making it ideal for LRA arrays, smart rings, wearables, or devices requiring a small diameter LRA.

Size (mm）：Φ6*4
Rated voltage(V)：1.8V
Rated Current（mA）：≤75mA
Input Frequency（Hz）：210±0.1Hz
Starting Voltage (V)：0.5 ~ 1.8 V

JTB0620A3419F vibration motors are made for a number of uses and come in diameters between φ6mm and φ12mm. With a strong, long-lasting self-adhesive mounting method, these brushless DC (BLDC) motors are simple to use and remain in position. With adjustable wire lengths and connections, we have versions with lead wire, FPCB, and spring mount choices.

Size (mm）：Φ 6*2.0

Rated voltage(V)：3.0V
Rated Current（mA）：≤80mA
Rated speed(rpm)：13000
Starting Voltage (V)：≤2.5V