Products

The JTMB-0089 coin vibration motor is designed for a variety of applications requiring precise and reliable vibration feedback. The motor’s compact size and efficient performance make it ideal for consumer electronics, wearable technology and other space-constrained devices.

Basic size (mm): 1243.5
Rated voltage (V): 1.8V
Rated current (mA): ≤90mA
Input frequency (Hz): 240±15Hz
Operating voltage (V): [Please provide operating voltage range]

The JTMB-0088 coin vibration motor is designed for a variety of applications requiring precise and reliable vibration feedback. The motor’s compact size and efficient performance make it ideal for consumer electronics, wearable technology and other devices where space is limited.

Size (mm）：Φ 12*4*3.5
Rated voltage(V)：1.8V
Rated Current（mA）：≤90mA
Input Frequency（Hz）：240±15Hz
Operating Voltage(V)：

Basic size (mm): Φ 1243.5
Rated voltage (V): 1.8V
Rated current (mA): ≤90mA
Input frequency (Hz): 240±15Hz
Operating voltage (V): [Please provide operating voltage range]

Our JTW0934AB007G brushless BLDC coin vibration motor produces 1.4 Grms (avg). This wireless contact configuration is favored by engineers for its simplicity and ease of assembly during mass production. The motor’s contact pads are designed to mate with PCB-mounted pogo pins or spring contacts . Rated for 1,000,000 cycles (min), this BLDC vibration motor is an excellent choice for applications with high duty cycles and devices requiring a very low MTBF.

Size (mm）：Φ9*3.4
Rated voltage(V)：3.0V
Rated Current（mA）：≤80mA
Rated speed(rpm)：11500±2500
Starting Voltage (V)：≤2.5V

The JTW0825AB002G brushless BLDC coin vibration motor is ideal for high reliability (Hi-Rel) applications or high duty cycle applications. For ease of assembly, it has contact pads designed to mate with PCB mounted contact springs. Embedded driver IC eliminates the need for external driver IC. DC voltage is applied like a normal brushed DC motor.

Size (mm）：Φ 8*2.5
Rated voltage(V)：3.0V
Rated Current（mA）：≤80mA
Rated speed(rpm)：13500±3500
Starting Voltage (V)：≤2.35V

The JTW0625AB01G brushless BLDC coin vibration motor is ideal for high reliability (Hi-Rel) applications or high duty cycle applications. The driver IC is built into the motor, so no external driver IC is required. DC voltage is applied like a normal brushed DC motor. This type of motor costs about twice as much as a similarly sized brushed motor. If you don’t need a Hi-Rel motor, consider using this motor.

Size (mm）：Φ6*2.5
Rated voltage(V)：3.0V
Rated Current（mA）：≤80mA
Rated speed(rpm)：15000±3000
Starting Voltage (V)：≤2.5V

The JTM0412G-FP192-U is a high-performance rectangular linear resonant actuator (LRA) that can be used in a variety of tactile feedback applications. The device is designed to be mounted on the inner shell of the product enclosure. PCB mounted contact springs or pogo pins mate with the LRA’s contact pads. As with all LRAs, this device is typically connected to an LRA driver IC, which generates the AC drive signal for the device.

Size (mm）：12*3.5*4.0

Rated voltage(V)：1.8V

Rated Current（mA）：≤60mA

Input Frequency（Hz)：240 ±10Hz

Operating Voltage(V)：0.1~1.85V

The JTZ7AL2B1690002 series of 3 volt, 7mm vibration motors generates the most vibration energy of any 7mm diameter motor we currently make. It is also available in a liquid-resistant plastic capsule or with a PCB mounting bracket.

Size (mm）：23.3*16.5*7.0
Rated voltage(V)：3.0V
Rated Current（mA）：≤180mA
Rated speed(rpm)：12000±2500
Starting Voltage (V)：≤1.7V

The JT7AL2B020208B is a modified version of our popular JT7AL2B0202082. We have added epoxy at the end to improve encapsulation and to act as a strain relief for the wire leads. We have also optimized this motor for low current consumption while generating a reasonable 1.5G of vibration force. We can supply a higher G force version of this motor as well. These motors do not have an IP rating. We also offer a version of this motor with the leads terminated with a connector. See JT7AJ2B1692081. Custom lead length and other connector options are also available.

Size (mm）：16.6*5.2*5.0
Rated voltage(V)：3.0V
Rated Current（mA）：≤180mA
Rated speed(rpm)：12000±2500
Starting Voltage (V)：≤1.7V

This 7mm diameter vibration motor is a member of our JT7AL2 / 7AL-09WA series and is the largest diameter motor we manufacture. It has a rated RPM of 7000 RPM and a vibration frequency of 117 Hz. If you need a lower RPM motor, consider using our JT7AL2A1690001 vibration motor which operates at 5500 RPM.

Size (mm）：21.9*16.5*7.0

Rated voltage(V)：1.3V

Rated Current（mA）：≤65mA

Rated speed(rpm)：6000±2000

Starting Voltage (V)：≤0.75V

The JT7AJ2B1692081 is a connectorized version of our popular JT7AL2B1692082. Wire leads are terminated with a JST PHR-2 connector. Other connector types and lead lengths are available upon request.

Size (mm）：23.0*16.5*7.0
Rated voltage(V)：3.0V
Rated Current（mA）：≤180mA
Rated speed(rpm)：12000±2500
Starting Voltage (V)：≤1.7V

The JTZ6SL2B0060071 motor is identical to our JT6SL2A0060001 vibrator motor but with a through-hole PCB mounting bracket.

Size (mm）：14.3*10.2*6

Rated voltage(V)：3.0V

Rated Current（mA）：≤70mA

Rated speed(rpm)：10000±2500

Starting Voltage (V)：≤1.7V

This motor is a member of our very popular JT6S series of vibration motors. The JT6S series is our smallest 6mm motor. For orders of 1000 pieces, we can add a connector to the end of the wire.

Size (mm）：14.1*10.0*6.0

Rated voltage(V)：1.3V

Rated Current（mA）：≤90mA

Rated speed(rpm)：8500±2000

Starting Voltage (V)：≤0.75V